Constant Pressure Regulating Safety Valve And Relief Valve With Butt Weld End DN15-DN100

Constant Pressure Regulating Sanitary Pressure Relief Valve With Butt Weld End DN15-DN100

Quick Details

• Vavle body and disc are made of best 316L or 304 stainless steel
• Outside surface is treated by sandblasting
• The diaphragm material can be EPDM or PTFE, high temperature standable upto 140 degrees
• Butt weld connection end offers simple and fast installation, strong and no leakage
• Very popular to regulate medium pressure in the pipeline or tank at a set pressure value
• Valve cover and seat are fixed by tri clamp

Working Principle

• The valve is normally closed when the medium pressure is within set value
• When medium pressure increases, the diaphragm is pushed upwards
• Valve stem moves upwards accordingly
• Medium then flows out of the valve, make the pipeline pressure reduces
• The diaphragm is pushed back by the air pressure in upper chamber
• The diaphragm keeps moving downwards until the valve is closed

Specifications

• Size: DN15 ~ DN100
• Connection End: Butt weld
• Valve Closing Pressure: 10 bar
• Valve Opening Pressure: 5 bar
• Working Pressure: 0 ~ 10 bar
• Working Temperature: -10 ~ 140°C
• Air Supply Pressure: 0 ~ 6 bar
• Kv in Completely Open condition: 23M3/h
• Kv in Low Flow Condition: 2M3/h
• Kv for CIP: 15M3/h

tri clamp pressure relief valve

hygienic pressure relief valve

Constant Pressure Regulating Safety Valve And Relief Valve With Butt Weld End DN15-DN100 Images